GH logo | © GH

Menu

Areas of application

DE EN

Binding instructions for GH TEXFLEX X-TREME

Step by step guide

Components
Overview

In this binding instruction, one tube end is bound with a plastic anti-kink spiral, the other end with a metal anti-kink spiral!

 

1 GH TEXFLEX X-TREME

2 Metal anti-kink spiral

3 Plastic anti-kink spiral
4 Kink part with connecting piece and lantern piece (coupling must be disassembled before assembly)

5 Heat shrink tubing

6 Mounting tool

 

 

Preparing
Plastic anti-kink spiral

Pull the plastic anti-kink spiral over the hose - carefully untwist the spiral slightly.

Pull locking ring and 2 shrink tubes over the hose.

Hose end 1
Binding, pressing & fusing plastic kink protection spiral

  • Clamp nozzle in the fixture provided + push hose completely onto nozzle.
  • Wind 1.8 mm wire with 2 x 6 turns and a connecting chain between the 2 binding fields.
  • Then pull the plastic anti-kink spiral over the wire band up to the nozzle at the front.
  • Push the shrink tube onto the plastic anti-kink spiral at the front of the nozzle.
  • Use a heat gun (approx. 540°C) to slowly heat the shrink tubing.
  • Place a heat shrink tube in the end area of the plastic kink protection spiral and also heat slowly with the heat gun (approx. 540°C).
  • Final result.
  • Firmly mount the knuckle part and the lantern piece.
  • Finished bound side with the plastic anti-kink spiral.

Hose end 2
Binding, pressing & fusing metal anti-kink spiral

  • Pull the metal anti-kink spiral over the hose, carefully untwisting the spiral slightly.
  • Pull knuckle part, locking ring and 2 shrink tubes over the hose.
    Wind 1.8 mm wire with 2 x 6 turns, with a connecting chain between the 2 binding fields.
  • Slide the shrink tubing onto the metal anti-kick spiral at the front of the clevis and at the end of the spiral.
  • Slowly heat the shrink tubing with a heat gun (approx. 540°C).
  • Now place a shrink hose in the end area of the metal anti-kink spiral and also heat slowly with the heat gun.
  • Heat shrink tubing must be fused at the spigot at the front of the metal anti-kink spiral and halfway across the end of the metal anti-kink spiral.

Ready-bound GH TEXFLEX X-TREME.