GH Hilcoflex Agro Agricultural hose with rubberized lining and jacket

At a glance

Standard lengths

100 m

200 m

Other lengths available on request (possibly with cutting fee)

Temperature ranges

-20 °C

bis

80 °C

(Specifications apply to Water)

Areas of application

Irrigation, especially pivot systems

Liquid manure distribution

Sludge and wastewater distribution

Transport hose for watering and drainage

For especially heavy-duty work

Contact person

Contact

Gollmer & Hummel GmbH
Gässlesweg 23
75334 Straubenhardt

Material construction

Jacket lining:

Warp: High-tenacity polyester, reinforced design
Weft: Polyamide/polyester; circular woven
The special jacket construction ensures outstanding adhesion, tight bending radii and much lower pressure loss compared to a 100% polyester jacket lining
Very little elongation under pressure thanks to a special weaving and vulcanization process
Totally embedded in the rubber, offering optimum protection against mechanical damage

Rubberized lining and jacket:

Very high-grade NBR/PVC compound, extruded through the weave in a special one-step production process
Special additives in the compound guarantee outstanding resistance to aging and ozone
Inside: Very smooth for minimal pressure loss
Outside: Reinforced cover and strong longitudinal ribs for extremely high abrasion resistance

Advantages

Unbeatable resistance to aging and ozone
Outstanding abrasion resistance, even on difficult ground surfaces
Very good resistance to fertilizers, agricultural chemicals and microorganisms
Very high tensile strength, low pressure loss and elongation
Excellent adhesion between the rubber and jacket lining
Tough and durable

Pressures

Working pressure:

Specifications apply only to the hose (medium water, 20 °C). The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly. For compressed air, the maximum working pressure is 25% of the burst pressure.

Maximum working pressure:

Approval can only be given by the manufacturer upon clarification of the exact area of application.

Order hose sample >>

Datasheet download

Inside diameter in mm	Weight in g/m	Wall thickness in mm	Working pressure in bar	Max. working pressure in bar	Burst pressure in bar	Tensile strength in kg
52	600	3.3	16	20	50	3,900
65	750	3.3	16	20	50	6,300
76	900	3.3	16	20	50	8,800
90	1150	3.4	16	20	50	10,900
102	1350	3.5	16	20	50	12,400
114 *	1450	3.7	15	18	45	12,400
127	1700	3.9	15	18	45	17,000
152	1950	3.9	14	17	42	17,900
180 *	2900	4.5	14	17	42	24,000
205	3500	4.5	10	12	30	26,900
254 *	4200	5.2	10	12	30	43,200

Diameters marked * available on request.

Specifications apply only to the hose. The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly.