GH Hilcoflex Spezial High-pressure hose with rubberized lining and jacket

At a glance

Standard lengths

100 m

Other lengths available on request (possibly with cutting fee)

Temperature ranges

-20 °C

bis

80 °C

(Specifications apply to Water)

°C

bis

75 °C

(Specifications apply to Air)

Areas of application

Construction, especially demolition firms

Industry

Mining

Liquids and compressed air, high pressure

For especially heavy-duty work

Contact person

Contact

Gollmer & Hummel GmbH
Gässlesweg 23
75334 Straubenhardt

Material construction

Jacket lining:

Warp: High-tenacity polyester
Weft: Polyamide; circular woven
The special jacket construction ensures outstanding adhesion and much lower pressure loss compared to a 100% polyester jacket lining
Totally embedded in the reinforced rubber, offering optimum protection against mechanical damage

Rubberized lining and jacket:

Very high-grade NBR/PVC compound, extruded through the weave in a special one-step production process
Special additives in the compound guarantee outstanding resistance to aging and ozone
Inside: Very smooth for minimal pressure loss
Outside: Ribbed for excellent abrasion resistance, protection against contact heat

Advantages

Highly resistant to abrasion, tough and durable
Resistant to oil, gasoline and chemicals (see resistance table)
Resistant to heat, aging and ozone
Very low pressure loss and minimal elongation
Very lightweight, flexible and pressure-resistant compared to mandrel-wound industrial hoses
No cleaning or drying required

Pressures

Working pressure:

Specifications apply only to the hose (medium water, 20 °C). The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly. For compressed air, the maximum working pressure is 25% of the burst pressure.

Maximum working pressure:

Approval can only be given by the manufacturer upon clarification of the exact area of application.

Order hose sample >>

Datasheet download

Inside diameter in mm	Weight in g/m	Wall thickness in mm	Working pressure in bar	Max. working pressure in bar	Burst pressure in bar	Tensile strength in kg
45	460	3.3	20	24	60	4,000
52	550	3.4	20	24	60	4,800
65	750	3.7	20	24	60	6,900
75	980	4.0	20	24	60	9,500

Specifications apply only to the hose. The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly.