GH Hilcoflex PU Drag Extra TPU hoses for liquid manure hose systems

At a glance

Standard lengths

100 m

200 m

Other lengths available on request (possibly with cutting fee)

Temperature ranges

-50 °C

bis

75 °C

(Specifications apply to Water)

Areas of application

Transport hose between lagoon and field

Drag hose to tow behind tractors

Please note that some HILCOFLEX PU hose sizes can be used for both applications

Contact person

Contact

Gollmer & Hummel GmbH
Gässlesweg 23
75334 Straubenhardt

Material construction

Jacket lining:

High-tenacity polyester yarn, circular woven
Specially designed for high tensile strength, tight bending radii and very little elongation under pressure
Totally embedded in the polyurethane, offering optimum protection against mechanical damage

Lining and jacket:

Thermoplastic polyether polyurethane, extruded through the weave in a special one-step production process
Highly resistant to abrasion, 5–6 times longer service life than nitrile hoses
Inside: Very smooth for minimal pressure loss
Outside: Very smooth for good flexibility, thick-walled for unbeatable wear resistance

Advantages

Outstanding resistance to abrasion
Extremely tough, hard-wearing and durable
Extremely high tensile strength
Resistant to oil, gasoline and chemicals (see resistance table)
Resistant to aging and ozone
Lightweight and easy to use compared to material transport hoses made of rubber
Stays flexible at cold temperatures

Pressures

Working pressure:

Specifications apply only to the hose (medium water, 20 °C). The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly. For compressed air, the maximum working pressure is 25% of the burst pressure.

Maximum working pressure:

Approval can only be given by the manufacturer upon clarification of the exact area of application.

Datasheet

Inside diameter in mm	Weight in g/m	Wall thickness in mm	Working pressure in bar	Max. working pressure in bar	Burst pressure in bar	Tear resistance in kg
102	1650	4.5	14	17	42	13,800
114	1900	4.5	14	17	42	13,800
127	2300	4.5	14	17	42	20,500

Specifications apply only to the hose. The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly.