GH Titan Attack Type 1 fire hose - designed for the most challenging tasks!

At a glance

Standard lengths

60 m

Other lengths available on request (possibly with cutting fee)

Temperature ranges

-40 °C

bis

80 °C

(Specifications apply to Water)

Standard colors

Areas of application

Fire department

Industry

Military

Disaster relief

Contact person

Contact

Gollmer & Hummel GmbH
Gässlesweg 23
75334 Straubenhardt

Material construction

High-grade EPDM rubber lining, flexible at low temperatures, also suitable for hot water
This type of rubber guarantees a very smooth lining with low friction loss
Very good adhesion between the rubber and jacket

Advantages

Designed for the most challenging tasks! This hose comes with everything needed for indoor firefighting. The very small bending radius, by far the best abrasion resistance and huge performance reserves make this product a piece of life insurance in a hose pack for interior firefighting!
Burst pressure over 85 bar for high performance reserves
Still achieves a burst pressure of over 70 bar after a DIN Level 3 abrasion test
Very small bending radius resulting in less kinking = longer lifespan
Extremely high abrasion resistance thanks to special GH 4Z system
Distinctive design with contrasting weave for high visibility in indoor firefighting
Clearly exceeds Level 3 requirements (DIN 14811/A2) for abrasion
Standard GH HOSE GUARD protects against coupling defects
Stainless-steel wire hose binding
Less susceptible to tangling and stretching
Suitable for all types of hose washing systems

Pressures

Working pressure:

Specifications apply only to the hose (medium water, 20 °C). The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly.

Maximum working pressure:

Approval can only be given by the manufacturer upon clarification of the exact area of application.

Order hose sample >>

Datasheet download

Inside diameter in mm	Weight in g/m	Working pressure in bar	Burst pressure in bar	Bending radius in mm	DIN performance level	Approval
42	275	16	85	230	L3	DIN 14811

Specifications apply only to the hose. The potential working pressure may be lower than specified above for hose lines with couplings due to the nominal pressure of the couplings or the type of assembly.